QUALITY

Through solid processes + meeting customer expectations.

Standards of Production:

Laser

24ga > 0.25” tol. +/-0.008” (up to 48” linear)

0.3125” > 0.50” tol. +/-0.025” (up to 48” linear)

0.625” > 0.75” tol. +/-0.040” (up to 48” linear)

Water Jet

24ga > 0.50” tol. +/-0.020” (up to 48” linear)

0.625” > 1.00” tol. +/-0.030” (up to 48” linear)

1.125” > 1.50” tol. +/-0.040” (up to 48” linear)

1.75” > 2.25” tol. +/-0.060” (up to 48” linear)

2.50” > 3.00” tol. +/-0.090” (up to 48” linear)

3.25” > 4.00” tol. +/-0.125” (up to 48” linear)

4.25” > 6.00” tol. +/-0.188” (up to 48” linear)

Emtek does not guarantee flatness of processed parts. Once the state of prime material has been altered, standard flatness tolerances are no longer valid.

Emtek does not guarantee surface finish of hot-rolled plate or aluminum.

Emtek’s inventory is completely traceable from mill to your application. Material trace-ability is recorded and audited internally through our standard operating and quality procedure.

Grinding Metal

Quality Control Contacts:

Paul Emrich, Quality Manager paul@emtekalloys.com

Jeff Emrich, General Manager jeff@emtekalloys.com

Quality Control Policy:

The following outlines Emtek Processed Alloys Inc. quality policy (Ref: 2.0 Policy and Objectives). For a complete copy of our quality manual, please request.

Emtek Processed Alloys Inc. quality policy is to achieve sustained growth by providing first stage alloy processing services which consistently satisfy the needs and expectations of its customers.

This level of quality is achieved through adoption of a system of procedures that reflect the competence of Emtek to existing customers, potential customers, and independent auditing authorities.

Achievement of this policy involves all staff, who are individually responsible for the quality of their work, resulting in a continually improving working environment for all.

To achieve and maintain the required level of assurance the General Manager retains responsibility for the Quality System with routine operation controlled by the Quality Manager.

  1. To maintain an effective Quality Assurance System complying with general industry standards and practices that are considered reasonable.
  2. To achieve and maintain a level of quality which enhances the reputation of Emtek with customers and suppliers.
  3. To ensure compliance with relevant statutory and safety requirements.
  4. To endeavor, at all times, to maximize customer satisfaction with the services provided by Emtek Processed Alloys Inc.

EMTEK PROCESSED ALLOYS INC.

Strength in Technology, Pride in Quality